Watching; Information Banner - Panasonic TX-L50EM6Y Operating Instructions Manual

Watching TV
1
Turn power on
(TV)
or
Mains power On / Off switch should be on. (p. 8)
(Remote Control)
2
Select the mode
TV Selection
DVB-C
DVB-T
Analogue
Selectable modes vary depending on the tuned
channels.
You can also select the mode by pressing the TV button
repeatedly.
If [TV Selection] menu is not displayed, press the TV
button to switch the mode.
3
Select a channel
up
or
down
To select 2 or more-digit channel position number, e.g.
399
To select from the Channel List
All DVB-T Channels
6 Cartoon Nwk
7 BBC Radio Wales
8 BBC Radio Cymru
1 BBC ONE Wales
2 BBC THREE
3 BBCi
4 CBBC Channel
Note
The TV will automatically go into Standby mode when
no operation is performed for 4 hours if [Auto Standby]
in the Timer Menu is set to [On].
The TV will automatically go into Standby mode when
no signal is received and no operation is performed for
10 minutes if [No signal Power off] in the Timer Menu is
set to [On].
Aspect
Change the aspect ratio (image size)
[Auto]: The best ratio is selected automatically according
to the "Aspect Control Signal".
[16:9]: Directly displays the image at 16:9 without
distortion (anamorphic).
[14:9]: Displays the image at the standard 14:9 without
distortion.
[Just]: Displays a 4:3 image full-screen. Stretching is
only noticeable at the left and right edges.
[4:3]: Displays the image at the standard 4:3 without
distortion.
[Zoom]: Displays a 16:9 letterbox or 4:3 image without
distortion.
[4:3 Full]: Displays a 4:3 image enlarged horizontally to
fit the screen.
For HD (High definition) signals
[Sidecut Just]: Displays a 16:9 letterbox (anamorphic)
image full-screen. Stretching is only noticeable at the left
and right edges.
For HD (High definition) signals
[Sidecut Zoom]: Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
For HD (High definition) signals
Note
Aspect mode can be memorised separately for SD
(Standard definition) and HD (High definition) signals.
Aspect cannot be changed in teletext service.

Information banner

Display Information banner
Example: DVB
1
HDTV HDTV
1 1
Sorting 123...
ZDF ZDF
Bad signal Bad signal
*
1 Channel position and name
2 Channel type ([Radio], [Data], [HDTV], etc.) /
Encrypted channel (
TV mode ( ,
3 Programme
4 Current time
5 Programme Start / Finish time (DVB)
Channel number, etc. (Analogue)
6 Progress time indicator of the selected programme
(DVB)
7 Category
To change the category (DVB)
Also appears when changing a channel.
2 3 5 6
Coronation Street
2 20:00 - 20:55
Now Info
Dolby D+ Dolby D+
) /
, )
(blue)
7 4
20:35
All DVB-T Channels
Change category
45 45
11