Advertisement
Safety Instructions (continued)
1)
Read these instructions in their entirety.
2)
Store this manual and packaging in a safe place.
3)
Heed all warnings.
4)
Follow instructions (do not take shortcuts).
5)
Do not use this apparatus near water.
6)
Clean only with a dry cloth.
7)
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatuses that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
The grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use attachments and accessories specified by the manufacturer.
12) Use only a compatible rack or cart for the final resting position.
13) Unplug this apparatus during lightning storm or when unused for a long
period of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in a way such as: power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
4
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
Introduction
Thank you for purchasing the MPower series of powered studio monitors:
MPower 6 and/or MPower 8.
When it comes to studio monitors, one would want sound clarity, accurate
audio reproduction, transparent performance with low distortion and
exceptional imaging. Each component of the MPower studio monitors was
meticulously chosen to deliver those desired characteristics.
The built-in amplifier of the MPower monitor accepts unbalanced (RCA)
and balanced (1/4" TRS and XLR) inputs. It also features High Frequency
adjustment control for listening personalization.
The woofer installed in the MPower monitor uses Aramid glass fiber cone
which is stiff and has low mass, allowing the woofer to have low harmonic
distortion. The ultra efficient ribbon tweeter has flatter impedance and
better response. The combination of these two components ensure
dynamic, melodious balance, transparency and neutral audio reproduction.
Specifications are subject to change without notice
5
Advertisement
