Panasonic DMR-ES15 Operating Instructions Manual page 13

Television operation
You can operate the TV through the unit's remote control.
Turn TV on/off
Input Select
Point the remote control at the television
While pressing [^ TV], enter the code with
the numbered buttons.
e.g., 01: [0] ➔ [1]
Manufacturer and Code No.
Brand Code
01/02/03/
Panasonic
04/45
AIWA 35
AKAI 27/30
BLAUPUNKT 09
BRANDT 10/15
BUSH 05/06
CURTIS 31
DESMET 05/31/33
DUAL 05/06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31
GOODMANS 05/06/31
GRUNDIG 09
22/23/31/
HITACHI
40/41/42
INNO HIT 34
IRRADIO 30
ITT 25
JVC 17/39
LOEWE 07/46
METZ 28/31
MITSUBISHI 06/19/20
MIVAR 24
NEC 36
Test by turning on the television and changing channels. Repeat the
procedure until you find the code that allows correct operation.
• If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
Volume
Channel
Select
Brand Code
NOKIA 25/26/27
NORDMENDE 10
ORION 37
PHILIPS 05/06
PHONOLA 31/33
PIONEER 38
PYE 05/06
RADIOLA 05/06
SABA 10
SALORA 26
SAMSUNG 31/32/43
SANSUI 05/31/33
SANYO 21
SBR 06
05/06/29/
SCHNEIDER
30/31
SELECO 06/25
SHARP 18
SIEMENS 09
SINUDYNE 05/06/33
SONY 08
10/11/12/
TELEFUNKEN
13/14
THOMSON 10/15/44
TOSHIBA 16
WHITE
05/06
WESTINGHOUSE
When other Panasonic products
respond to this remote control
When other Panasonic products placed nearby affect this unit's
remote control, change the remote control code on the main unit and
the remote control (the two must match).
Under normal circumstances use the factory set code "DVD 1".
To change the code on the main unit
1
While stopped
Press [FUNCTIONS].
2
Press [e,r] to select "To Others" and
press [ENTER].
3
Press [e,r] to select "Setup" and
press [ENTER].
4
Press [e,r] to select "Others" and
press [q].
5
Press [e,r] to select "Remote
Control" and press [ENTER].
6
Press [e,r] to select the code
("DVD 1", "DVD 2" or "DVD 3") and
press [ENTER].
Remote Control
Setup
Press " " and "ENTER" together
for more than 2 seconds on the remote
Tuning
control.
Disc
Picture
Sound
Display
Connection
ENTER
Others
RETURN
To change the code on the remote control
7
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
8
Press [ENTER].
■ When the following indicator appears on the
unit's display
Note
Executing "Shipping Condition" in the Setup menu returns the main
unit code to "DVD 1". Change the remote control code to 1
(➔ step 7).
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Press and hold [ENTER] and
the indicated number button at
the same time for more than
2 seconds.
RQT8318
13
13