Panasonic HX-DC2 Operating Instructions Manual page 118


≥ Set to Playback mode. (l 30)
1
Connect the unit to the recording equipment and
begin playback on the unit.
≥ If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in playback mode. Check on
the TV screen instead.
2
Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping
recording on the recorder.
≥ Even when [DISPLAY] is set to [OFF], the battery icon will be displayed
if the battery runs low. Be sure to use a battery which has been
charged sufficiently.
118
VQT4D23
Change the video input
on the video device and
TV that this unit is
connected to.

≥ The channel set will differ
depending on the terminal to
which the unit is connected.
≥ See the operating
instructions of the video
device for details.
≥ Insert the plugs as far as
they will go.
≥ Do not use any other AV
cables except the supplied
one.
A AV cable (supplied)
≥ If your recorder is not
equipped with AV Input
Sockets, the 21-pin Adaptor
B (optional) is necessary.
Consult your dealer.