GE 20 Owner's Manual And Installation Instructions page 24

REVERSING THE DOOR SWING
REMOVE THE FREEZER DOOR
2
Tape the door shut with masking tape.
A
Remove hinge pin from hinge bracket. This will
B
be used again with the new hinge bracket for
the other side.
Remove the tape and tilt the door away from
C
the cabinet. Lift the door off the bottom hinge
pin.
D
Remove the button plug from the left side of the
door. Remove the door thimble from the right
side of the door. Install the door thimble into
the hole on the left and the button plug into the
hole on the right.
Set the door on a non-scratching surface, with
E
the inside up.
TRANSFER CENTER HINGE BRACKET
3
Using a 5/16" socket ratchet/driver, remove the
A
bolts securing the center hinge to the cabinet.
Installation Instructions
(cont.)
24
TRANSFER CENTER HINGE BRACKET
3
(cont.)
B
Transfer the plug button and screw hole cover
in the hinge holes on the left side to the right
side.
Install the new center hinge bracket from the kit
C
on the left side.
REMOVE BOTTOM HINGE AND
4
LEVELING LEG
Using a 1/2" socket ratchet/driver, remove the
A
nut and hinge pin from the hinge bracket with
leveling leg. Using a 5/16" socket ratchet/driver,
remove the screws from the bottom hinge
bracket. These will be reinstalled on the other
side.
Using a 5/16" socket ratchet/driver, remove
B
the screws from the leveling leg bracket on
the other side. These will be reinstalled on the
opposite side.
Bottom Hinge
Bracket
Leveling Leg
Bracket