Setting Keypad Lockout - Honeywell T7350 Installation Instructions Manual

12. Display prompts SAV CFG (save configuration).
a. If you want to save the new configuration, use
the up or down
before pressing Run Schedule.
b. If you want the configuration to remain as it was
before starting this change, ensure the
display indicates SAV CFG NO and press Run
Schedule.

Setting Keypad Lockout

Proper keypad sequences activate the lockout features.
To change the keypad lockout state:
1. Enter the Installer Setup: press and hold both the
Run Schedule and the Copy keys until DEG F (or
DEG C) displays.
2. Press until KYLCK displays.
key to change NO to YES
T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
3. Use the up or down
Options are:
• 0: No lockout.
• 1: Lockout all keys except Temporary Occupied,
Temporary Not Occupied, up
.
• 2: Lockout all keys except
NOTES:
— Options 1 and 2 do not allow adjustments on
dehumidification high limit.
— No options lockout special keypress func-
tions. See the Special Functions section for
details.
4. Once the proper option is chosen, exit Installer
Setup by pressing Run Schedule.
5. Display prompts SAV CFG. If you want to save it,
use the up or down
before pressing Run Schedule again.
5
key to change the setting.
, down and
.
key to change NO to YES
62-0195—04