Avol alt3760m Operation Manual page 7

Before the installation and use, please read carefully the relevant content in "Notice for Maintenance and Safety"
1. Take the LCD TV from the wrapping package and put it in a drafty and flat place.
Notice: When you plug or unplug the LCD TV, computer or other equipments, you must
make sure that the AC power has been already shut down;
When unplugging the power cable or signal cable, please hold the plug (the
insulated part), do not draw the body of the cable.
2. The RF output terminal can be connected with the RF input port of the TV.
3. The output AV/SVIDEO terminal of DVD can be connected with the AV/SVIDEO input port of the TV
through AV/SVIDEO cable.
Notice: SVIDEO and AV1 can not be used at same time for they share of one signal channel.
4. The output COMPONENT (YPbPr) terminal of DVD can be connected with the COMPONENT (YPbPr)
input port of the TV through AV cable.
5. The AV output of the TV can be connected with the input port of other AV equipment through AV cable.
6. Connect one end of the VGA cable with the VGA port on computer, connect the other end of the VGA cable
with the VGA port on the TV, and tighten the bolts clockwise on the each end of VGA cable.
Notice: While connecting the 15-pin VGA, please do not insert the plug overexertedly, for
fear the pin might be broken.
7. Connect one end of the HDMI cable with HDMI output port, connect the other end of the HDMI cable with
the HDMI port on the TV, and tighten the bolts clockwise on the each end of HDMI cable.
Notice: While connecting the HDMI, please aim at carefully, do not insert overexertedly,for
fear the pin might be broken.
8. Check and make sure that all AV cables are connected with the corresponding ports correctly.
9. Connect the AC power cable with 100-240V AC power supply.
10. Connect the other end of the AC power cable with the AC power port on the TV.
CAUTION：
The range of power input for the LCD TV is 100-240V /50Hz,60Hz, do not
connect the TV power input port with the AC power out of the above range.
Please hold the insulated part of the plug when you are unplugging the
power cable, do not touch directly the metallic part of the cable.
INSTALLATION
5