Yamaha YAS-306 Owner's Manual page 36

Bluetooth
Receiving
Problem Cause
Unable to connect The Bluetooth function is
the unit to a disabled.
Bluetooth device.
Bluetooth is not selected as the
input source.
Another Bluetooth device is
connected.
A Bluetooth adaptor, etc. that you
want to connect to the unit has a
password other than "0000".
The device does not support
A2DP.
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
No sound is heard or The device is not set to send
the sound is Bluetooth audio signals to the
unit.
intermittent via the
unit.
Playback on the device has not
been performed.
The device's volume is set to
minimum.
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
The Bluetooth connection of the
unit with the device is
disconnected.
Transmitting
Remedy
Enable the function (p.31). Cannot make the unit
connected to the
Bluetooth device.
Select Bluetooth as the input
source (p.16).
Terminate the current Bluetooth
connection, and connect to the
device from which audio should
be received (p.16).
Use a Bluetooth adaptor, etc.
whose password is "0000" (p.16).
Connect to a Bluetooth audio
device that supports A2DP.
Position the Bluetooth device so
that it is less than 10 m (33 ft)
from this unit and connect the
device to this unit. No sound is heard or
the sound is
Move this unit away from the
intermittent via the
device that is emitting radio
Bluetooth device.
frequency signals.
Check that the Bluetooth function
of the device is set properly.
Perform playback on the device.
Turn up the volume level on the
device.
Move the Bluetooth device so that
it is less than 10 m (33 ft) from
this unit.
Move this unit away from the
device that is emitting radio
frequency signal.
Perform Bluetooth connection
operations again (p.16).
Problem Cause
The Bluetooth function is
disabled.
Another Bluetooth device is
connected.
The device does not support
A2DP.
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
The device is not set to receive
Bluetooth audio signals from the
unit.
The device's volume is set to
minimum.
The sound to be transmitted is not
playing.
The unit and device are too far
apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
The Bluetooth connection of the
unit with the device is
disconnected.
Attempted to establish a
connection during playback with
AirPlay.
APPENDIX ➤ Troubleshooting
Remedy
Enable the function (p.31).
Terminate the current Bluetooth
connection, and connect to the
device to which audio should be
transmitted (p.17).
Connect to a Bluetooth audio
device that supports A2DP.
Position the Bluetooth device so
that it is less than 10 m (33 ft)
from this unit and connect the
device to this unit.
Move this unit away from the
device that is emitting radio
frequency signals.
Check that the Bluetooth function
of the device is set properly.
Turn up the volume level on the
device.
Use the MusicCast
CONTROLLER app to play sound
from devices other than Bluetooth
devices (p.17).
Move the Bluetooth device so that
it is less than 10 m (33 ft) from
this unit.
Move this unit away from the
device that is emitting radio
frequency signals.
Perform Bluetooth connection
operations again (p.17).
Playback with AirPlay cannot be
transmitted. Terminate AirPlay
playback and try again to
establish a connection (p.24).
36
En