Advertisement
Discs that can be Played Back
E
N
G
L
I
S
H
Disc
Mark (logo)
7
DVD video
Video CD
CD
Region management information
Example:
This product is designed and manufactured to respond to the region manage-
ment information that is recorded on a DVD disc. If the region number described
on the DVD disc does not correspond to the region number of this product, this
product cannot play the disc.
You can play discs with labels containing the region number "1" and "ALL".
Symbols used on jackets
(Examples of such symbols include)
≥ Number of subtitle languages
≥ Number of audio tracks
≥ Number of angles
The numbers indicate the number of lan-
guages, tracks, angles, etc., recorded on the
disc.
The following discs cannot be played back on this product.
≥ DVD-Audio
≥ CD-R
≥ DVD-ROM
≥ DVD-R
≥ DVD-RAM
≥ SVCD
≥ VSD
≥ CVD
≥ SACD
≥ photo CD
≥ dts CDs
≥ Divx video discs
≥ CD-EXTRA (audio-only playback possible)
≥ Discs recorded in PAL format, others
≥ DVDs with a region number other than "1" or "ALL"
≥ Playing back a CD-R disc or a photo CD disc with this unit could damage the data that is recorded on
the disc.
≥ This unit cannot play back a "dts CD" correctly.
22
CY-VMD9000U
Disc size
Video format Region number
1
NTSC
ALL
5q (12 cm)
NTSC
3q (8 cm)
Screen size (H:V aspect ratio)
≥ 4:3 standard size
4:3
≥ Letterbox
(
page 89)
LB
≥ 16:9 wide size
: Plays back in letterbox format on a
16:9 LB
standard screen (4:3).
: Plays back in "Pan & Scan" (
16:9 PS
page 89) format on a standard
screen (4:3).
Note:
≥ The size of the image that is displayed on the
screen depends on the screen mode of the CY-
VMD9000U ("Aspect Ratio"
page 42), and on
the screen size for the content on the disc.
≥ DVD+RW
≥ DVD-RW
≥ dts DVDs
≥ CD-G
≥ CD-ROM
≥ CD-RW
≥ CDV
When "
" is displayed
Input is not possible because a soundtrack, subtitle language or angle number which
was not recorded on the disc has been selected or because the use has attempted to
perform an operation which is not supported by the unit.
Disc Formats
LPCM (Linear PCM)
In this format, the audio signal is converted to digital data and recorded
in two channels without compression. Because the capacity of a DVD
video disc is large, it can store more data with better accuracy than a CD.
Note:
≥ "LPCM" is displayed only for DVD video discs.
Dolby Digital
This fully discrete format divides the music signals into 5.1 channels:
Front Left (L), Front Right (R), Center (C), Left Surround (LS), Right
Surround (RS) and Subwoofer (SW: 0.1 channel) for recording and play-
back. The number of channels that are recorded depends on the soft-
ware. (1 to 5.1 channels)
Note:
≥ The supplied speaker only outputs the audio from the Front Left (L),
Front Right (R), and Center (C) channels.
Surround Format
This format records signals from four channels [Front Left (L), Front
Right (R), Center (C), and Monaural Surround (S)] in two channels,
decodes those channels through a Dolby Pro Logic decoder, and then
outputs the resulting signals in four channels.
Notes:
≥ If "DTS" is selected in the disc settings while playing back a DVD video disc, the audio will not be output.
Change the disc setting to "Dolby Digital" or "PCM".
(For details on how to change this setting, refer to the instructions provided with the disc.)
≥ dts playback is possible if the CY-VMD9000U is connected to the CA-TU9000U multi channel AV control
unit with receiver (sold separately).
DVD
VIDEO
CD
VIDEO
CD
DVD
VIDEO
DVD
VIDEO
P R O
•
L O G I C
23
CY-VMD9000U
E
N
G
L
I
S
H
8
Advertisement
