Using Your Headphones; Displaying Input Signal Information; Changing Information On The Front Panel Display - Yamaha RX-V1065 Owner's Manual

The following features are disabled in the Pure Direct
mode.
– sound field program, tone control
– display and operation of the Option menu and Setup
menu
– multi-zone function
y
• The font panel display automatically turns off while this unit in the Pure
Direct mode.

Using your headphones

Plug your headphones in the LPHONES jack on
the front panel.
When you select a sound field program while using the
headphones, the mode is automatically set to SILENT
CINEMA mode.
Notes
• When you connect headphones, no signals are output at the speaker
terminals.
• When multi-channel signals are processed, sounds in all channels are
divided to left and right channels. When "MULTI CH" is selected as the
input source, only front L/R sounds are output from the headphones.

Displaying input signal information

When HDMI 1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
y
• Input signal information is displayed on both the GUI screen and front
panel display.
1
Select the desired input source and then
press rOPTION on the remote control.
The Option menu for the selected input source is
displayed (page 37).
2
Press jCursor k / n to select "Signal Info"
and then press jENTER.
Information on the input signal is displayed. See
page 38 for details about each information.
Signal Info
<Audio>
Format
Channel
Sampling Frequency
Bitrate
<Video>
Video In
Video Out
HDMI 1
Input
Straight
DSP
Note
• If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
3
To exit the Option menu, press rOPTION.
Dolby TrueHD
3 / 2 / 0.1
96kHz
---
HDMI 480p
HDMI 1080p
Changing information on the front
panel display
Press DINFO (or fINFO) repeatedly.
Available information differs depending on the selected
input source.
For example, if you select HDMI1 input and display "DSP
Program", the following screen appears on the front panel
display.
Input source
Straight
Sound field program
Input source
HDMI1-4
AV1-6
AUDIO1/2
V-AUX
PHONO
iPod (DOCK) (simple
remote mode)
BLUETOOTH (DOCK)
USB
iPod (DOCK) (menu
browse mode)
TUNER
MULTI CH
Playback
Information
Input
DSP Program
Audio Decoder
(on play information display)
DSP Program, Audio Decoder,
Song, Artist, Album
(on GUI screen)
List
Frequency, DSP Program,
Audio Decoder
Input
25
En