Unboxing Your Phone; Inserting A Sim Card And Microsd Card; Charging Your Phone - Huawei P9 lite User Manual

Unboxing your Phone

Inserting a SIM card and microSD card

Your phone's 2-in-1 card slot is located on the upper left side of the phone. You can
insert 2 nano-SIM cards, or 1 nano-SIM card and 1 microSD card.
Tips:
•
Your phone only supports nano-SIM cards. Contact your carrier for a new or
replacement nano-SIM card.
•
Only use standard nano-SIM cards to avoid damaging the SIM card tray.
•
Ensure that the card is in the correct position and keep the card tray level when
inserting it into your phone.
•
Be careful not to hurt yourself or damage your phone when using the SIM eject pin.
•
Store the SIM eject pin out of the reach of children to prevent accidental swallowing or
injury.
1
Press and hold the power button, and then select
2
To remove the card tray, insert the SIM eject PIN included with your phone into the
small hole next to the card tray.
3
Insert a SIM card or microSD card into the card tray.
4
Insert the card tray back into your phone in the correct orientation.

Charging your phone

Your phone comes with a long-lasting battery and efficient power-saving technology.
This section outlines how to care for your battery in order to maximize its lifespan.
Using your battery
•
You can recharge your battery many times, but all batteries have a limited lifespan. If
you notice a significant deterioration in your phone's battery life, contact an
Unboxing your Phone
to turn off your phone.
4