Panasonic DMC-FX30 Operating Instructions Manual page 57

Hide thumbs Also See for DMC-FX30:
Table of Contents

Advertisement

∫ Finishing setting the home area
• If you are setting the home area for the
first time, the screen returns to the screen
shown in step 1 of "Setting the home
area [HOME]" after you press [MENU/
SET] to set your home area. Press 2 to
return to the screen shown in step
then press [MENU/SET] to close the
menu.
• If you are setting the home area for the
second time etc., the screen returns to the
3
screen shown in step
[MENU/SET] to set your home area.
Press [MENU/SET] again to close the
menu.
∫ Setting the travel destination area
1
2
(Perform steps
,
and
1 Press 3 to select [DESTINATION] and
then press [MENU/SET] to set.
WORLD TIME
DESTINATION
HOME
--:-- --. --.----
CANCEL
SELECT
A: Depending on the setting, the time at
the travel destination area or the
home area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
2 Press 2/1 to select the area the travel
destination is in and then press [MENU/
SET] to set.
10:00
Seoul
Tokyo
+9:00
SELECT
3
and
3 Press [MENU/SET] to close the menu.
after you press
3
.)
• Return the setting to [HOME] when the
MENU
/SET
MENU
SET
• If you cannot find the travel destination in
• The [WORLD TIME] setting also affects
• The travel destination icon [
19:00
CANCEL
MENU
/SET
MENU
SET
Advanced (Recording pictures)
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
screen.
• If daylight saving time [
the travel destination, press 3. (The
time advances by one hour.) Press 3
again to return to the original time.
SETUP
CLOCK SET
WORLD TIME
MONITOR
GUIDE LINE
TRAVEL DATE
SELECT
• The icon changes from [
after setting the travel destination.
vacation is finished by performing steps
1
2
3
and then steps 1 and 2 of
,
,
"Setting the home area [HOME]". (P56)
the areas displayed on the screen, set by
the time difference from the home area.
simple mode [
].
when playing back pictures taken at the
travel destination.
] is used at
/
1
4
MENU
0
/SET
OFF
MENU
EXIT
] to [
]
] appears
57
VQT1B99

Advertisement

Table of Contents
loading

Table of Contents