Name And Function Of Parts - JVC VN-E4 Startup Manual

Name and Function of Parts

[Front]
A [POWER] Lamp
Lights up when the power of VN-E4 is turned on.
B [LINK] Lamp
Lights up when VN-E4 is connected to the network.
C [100M] Lamp
Lights up when VN-E4 is connected to the network via
100Base. The light will not be illuminated in the case of
10Base.
D [FDX/COL] Lamp
Lights up when VN-E4 is connected to the network via full
duplex. The light will not be illuminated in the case of half
duplex. The light will appear blinking when collision occurs.
E [STS] Status Lamp
Lights up when VN-E4 is started up properly. The light will
appear blinking when troubles occur during startup and the
error details will be displayed in CH1-CH4.
CH1 CH2 CH3
Light Light Light
OFF OFF OFF
Light Light Light
OFF OFF ON
F [ALM] Alarm Lamp
Displays alarm input to VN-E4. Lights up when there are
changes in the alarm input or when motion is detected. The
light will turn off automatically after 5 seconds.
6
A B C D
POWER LINK 100M FDX
/COL
CH4 Error Description
A device with the same
IP address as VN-E4 is
Light detected. The lamps
ON will not change until
the power of VN-E4 is
turned off.
There is no video
signal input to VN-E4.
Light
The normal display will
OFF
be restored upon input
of video signals.
E F G H I J K L
4 4
STS ALM O.L AUD CH1 CH2 CH3 CH4
G [O.L] Overload Lamp
Displays the processing load of VN-E4. This light is turned
off when this unit is functioning properly. This light is turned
on when the processing load of VN-E4 is too heavy.
H [AUD] Audio Lamp
Displays the audio transmission status of VN-E4. Lights up
during transmission of audio data to the network. Turns off
when there is no transmission.
I [CH1] Video 1 Channel Lamp
Displays the image transmission status of VN-E4. Lights up
during transmission of video input at Ch1 to the network.
Turns off when there is no transmission.
J [CH2] Video 2 Channel Lamp
Displays the image transmission status of VN-E4. Lights up
during transmission of video input at Ch2 to the network.
Turns off when there is no transmission.
K [CH3] Video 3 Channel Lamp
Displays the image transmission status of VN-E4. Lights up
during transmission of video input at Ch3 to the network.
Turns off when there is no transmission.
L [CH4] Video 4 Channel Lamp
Displays the image transmission status of VN-E4. Lights up
during transmission of video input at Ch4 to the network.
Turns off when there is no transmission.