L Base Unit Settings; Base Unit Settings - Panasonic KX-TG1861NZ Operating Instructions Manual

L

Base Unit Settings

Base unit settings
L Use the handset to customise the base unit.
L When customising the base unit, the current item or setting is highlighted.
To customise the base unit:
1
" (middle soft key)
2
Select L by pressing {^}, {V}, {<}, or {>}. i # (middle soft key)
3
Press {^} or {V} to select the desired item in the base unit settings menu. i #
4
Press {^} or {V} to select the desired item in the sub-menu. i #
5
Press {^} or {V} to select the desired setting then press # or follow the instruction in the
"Feature" column of the chart.
L To exit the operation, press {ih}.
Base unit settings
menu
Ringer Volume
Call Options
Other Options
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.
22
Sub-menu
—
Recall/Flash
Area Code
Call Restrict
Base Unit PIN
Repeater Mode
Feature (default setting)
Base unit ringer volume (Medium)
Change the recall time ("600 msec.").
page 23
page 23
Change base unit PIN ("0000").
– Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i #
("Off"): page 29
*1
*2