Table of Contents
Advertisement
TG1861AL(e)_QG.fm Page 6 Wednesday, March 29, 2006 4:27 PM
ADSL Issues (Noise on line)
Question
Why am I getting noise on my
telephone line?
Caller ID
Question
What do I need to do to display
caller information?
Registration (Adding new handset)
Question
How can I register a handset to
the base unit?
Which handsets can I buy to use
with this model?
Cause & solution
L If you subscribe to ADSL service, we recommend you
to attach an ADSL filter to the telephone line between
the base unit and the telephone line socket. Contact
your ADSL service provider or purchase an ADSL
filter from a retailer or store. Refer to troubleshooting
section for further details.
L If you do not subscribe to ADSL service, there may be
an enviromental issue that is causing the interference
(noise). Move closer to the base unit and check
whether there is noise. If there is no noise, some
enviromental interference has caused the noise.
L If there is noise intermittently, there is a possibility of
enviromental interference. Refer to the
troubleshooting.
Cause & solution
L You need to subscribe to Caller ID service. Consult
your service provider/telephone company for details.
L The message "You must first subscribe to
Caller ID." will be displayed until you receive caller
information after subscribing to Caller ID service.
Cause & solution
L Make sure that you follow registration procedure in
Operating Instructions:
– you are using the supplied handset that come with
the kit (KX-TG1861).
– the AC adaptor is connected to the base unit.
– the handset is charged and not placed on the base
unit.
– note the location of {x} (Page) button on the base
unit as this is used to start registration process and
is required to be pressed for about 3 seconds until
the registration tone is heard.
L The optional handset is KX-TGA186.
–
–
6
Advertisement
Table of Contents
