How To Use Viera Tools - Panasonic TXP65VT50E Operating Instructions Manual

■
To change 3D format manually
When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.
During the above operation
(red)
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
Source image
format
Frame Sequential
Side by Side (Full)
Side by Side
Top and Bottom
Normal format (2D)
∗ 1: When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed
without 3D effect.
●
Depending on the player or broadcasts, the image may be different from the above illustrations.

How to Use VIERA TOOLS

You can access some special features easily by using the VIERA TOOLS function.
■
To return to TV
or
24
Select the mode
3D Mode Selection (Manual)
Original
Frame Sequential - 3D
Frame Sequential - 2D
Side by Side - 3D
Side by Side - 2D
Top and Bottom - 3D
Top and Bottom - 2D
2D 3D
[Frame
[Original]
Sequential - 3D]
Normal 3D ∗
Display icons of the feature
1
Select a feature
2
VIERA Link
Follow the operations of each feature
3
[3D Mode Selection]
[Side by Side
- 3D] Bottom - 3D]
1
Normal 3D ∗
1
Normal 3D ∗
1
select
set
[Top and
[2D 3D]
Normal 3D ∗
1
Normal 3D
select
access