Charging The Shaver - Panasonic ES-LT2N Operating Instructions Manual

►Unlocking the power switch
1. Press the power switch for
more than 2 seconds.
The switch lock lamp will
blink.
• The power switch cannot be unlocked while charging.
►Checking the power switch is locked
Press the power switch while it is locked.
The switch lock lamp will blink and then turn off after 5 seconds.
• You can also check this by unplugging the AC adaptor while
charging.
ES-LT6N_4N_2N_EU.indb 13
2. Once the shaver starts
operating, release the
power switch.
The switch lock lamp will turn
off.

Charging the shaver

1
1
Insert the appliance plug [BB]
into the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor [B?] into a
household outlet.
• Wipe off any water droplets on the
appliance socket.
• Check that the charge status lamp
( ) glows.
• Charging is completed after approx. 1 hour.
The charging time may differ with the charging capacity.
• Charging the appliance after each use will not affect the
battery life.
3
3
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
2
1
13
2015/04/17 12:47:12