Names Of Controls And Terminals; Diver And Tv Area Settings - Panasonic CY-TUP153N Operating Instructions Manual

Names of Controls and Terminals

TV Tuner Unit
13
TV ANT IN
Terminal for connecting TV antennas (supplied)
TO HEAD UNIT/EXPANSION MODULE
(System-up connector)
Terminal for connecting a Head Unit (CQ-VD7003N, CQ-
VD6503N, option)/Expansion Module (CY-EM100N,
option).
POWER SUPPLY
Terminal for connecting to the power connector
Remote Control Unit
[PWR] (Power)
 Switches on/off the power. (page 16)
[BAND]
 Selects TV band. (page 16)
 Searches for channels and memorizes
them automatically. (page 17)
[] (CH DOWN) [] (CH UP)
 Selects an operation or item. (page 15)
 Selects or searches the channel. (page
16)
14 CY-TUP153N
REMOTE IN (Black)
TV OUT
Terminal for connecting a
Terminal for connecting a In-
Head Unit's remote output
dash Monitor (CY-VM7203N,
option). terminal.
L (White) R (Red)
VIDEO (Yellow)
Connect RCA cord to the video input terminal of the
Head Unit when connecting Head Unit/Expansion Module
Connecting Cable to the Head Unit.
Note:
 Point the emitter of the remote controller at the Head
Unit or the monitor.
[ENT] (ENTER)
 Determines an operation or item. (page 15)
 Shows TV channel display. (page 16)
[MENU]
 Shows the menu screen. (page 15)
[] [] (PRESET)
 Selects DIVER or TV AREA setting. (page
15)
 Selects the preset channel. (page 17)
 Sets the preset channel writing/deleting
mode. (page 17)

DIVER and TV AREA Settings

Refer to page 8 about the TV AREA (Country) setting.
Refer to page 10 about the DIVER (Diversity) Antenna
setting.
Read the explanation on this page as required.
[PWR] (Power) [ENT] (ENTER)
[MENU]
[] []
[] []
Group and TV AREA (Country)
Group TV AREA (Country)
GROUP1 Austlia, Belgium, Bosnia/h, Denmark,
Finland, Germany, Iceland, Netherlands,
Norway, Portugal, Slovenia, Spain,
Sweden, Switzerland
GROUP2 Russia
GROUP3 Italy
GROUP4 Rumania, Hungary, Czech
GROUP5 Ireland
GROUP6 United Kingdom
GROUP7 Angola
GROUP8 Australia
GROUP9 China
GROUP10 Indonesia
GROUP11 New Zealand
GROUP12 South Africa
Note:
 Only English is displayed on the OSD screen.
 AREA SELECT can be used to select countries other
than those where the product is distributed, but this
product is not compatible with those countries. (They
are shaded gray in the list.)
DIVER (Diversity) Antenna Setting
Diversity TV Antenna:
Of the two antennae connected to the system, the one
with the best reception is automatically selected for TV
reception. Turning DIVER (Diversity) setting to "ON"
reduces noise.
Confi rm "ON" to receive a good reception.
Default: ON
Setting: ON/OFF
 Press [PWR] (Power).
 Press [MENU].
 Press [] or [] to select "DIVER".
 Press [] or [] to select "ON" or "OFF".
 Press [ENT] (ENTER) or [MENU] to set and return to
the previous display.
TV AREA (Country) Setting
TV AREA:
TV reception area is consisted of 12 group.
See the left table to select the group where you operate
this unit.
Setting: GROUP1 to GROUP12
 Press [PWR] (Power).
 Press [MENU].
 Press [] or [] to select "TV AREA".
 Press [] or [] to select the group included your
country. (See the left table.)
 Press [ENT] (ENTER) or [MENU] to set and return to
the previous display.
CY-TUP153N
14
15