To Set The Timer - Panasonic CU-PW12GKX Operating Instructions Manual

TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting /
stopping improperly.
TO SET TEmPERATURE
• Selection range: 16˚C ~ 30˚C.
• Operating the unit within the recommended
temperature could induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
TO SELECT OPERATION mODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at
the standard setting temperature.
• To change the standard setting temperature, press
for " " or for "
Room Operation
temperature mode
23°C & above Cool
Below 23°C Dry
Below 20°C Heat
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
COOL mode - To enjoy cool air
DRy mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
TO SELECT FAN SPEED
(3 OPTIONS)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
TO ADJUST vERTICAL AIRFLOw
DIRECTION (5 OPTIONS)
• Keeps the room ventilated.
• If AUTO is set, the louvers swing up/down
automatically.
F566809_EN1.indd 5
".
Standard
setting
temperature (+2°C) (–2°C)
25°C 27°C 23°C
22°C 24°C 20°C
21°C 23°C 19°C

TO SET THE TImER

• When you want the air conditioner to turn ON or OFF
automatically.
Select ON/OFF timer and Set the
ON/OFF time hourly.
To cancel ON or OFF timer, press
• The timer indicator of the indoor unit will light up during
the timer operation.
• When ON Timer is set, the unit may start earlier before
the actual set time in order to achieve the desired
temperature on time.
• If you press operation
setting operation, timer setting will be cancelled.
• When a power failure occurs, the timer setting will be
cancelled. Once power is resumed, reset the timer.
Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
Confirm the
setting.
.
button during the timer
5
2009-1-16 18:05:42