■
Adjusting the panel to your desired angle
42-inch model
47-inch model
●
Do not place any objects within the full rotation range.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the cover.
3 Lift the TV from the pedestal.
4 Remove the assembly screws
Connections
●
External equipment and cables shown are not supplied with this TV.
●
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●
Check the type of terminals and cable plugs are correct when connecting.
●
Always use a fully wired SCART or HDMI cable.
●
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●
Also read the manual of the equipment being connected.
Terminals
11
10
8
50-inch model
(View from the top)
from the cover.
from the bracket.
1
2
3
9
8
55-inch model
15°
15°
4
5
6
7
1
CI slot
(p. 12)
2
SD Card slot
3
Headphone jack
(p. 12)
4
USB 1 - 3 port
5
HDMI1 - 3
(p. 10, 11)
6
DIGITAL AUDIO
7
AV2 (COMPONENT / VIDEO)
(p. 11)
8
AV1 (SCART)
(p. 10)
9
Terrestrial / cable terminal
(p. 9)
10
Satellite terminal
(p. 9)
11
ETHERNET
(p. 10)