Panasonic CZRWSU2N Operating Instructions Manual page 13

5. Operation (Cont.)
If the unit is not heating very effectively with a Low fan speed
the fan speed to High
Depending on the indoor unit being used, it may indicate a function that it
does not have. (The fan speed is constant.)
If you cannot turn the air conditioner off in the normal way
Disconnect the power to the indoor unit and contact the distributor where the
product was purchased.
<Auto operation>
Only when identical refrigerant system inside all the indoor units or cooling/
heating free-type are under control as one group. It heats or cools
automatically via the differences between the set temperature and the room
temperature.
<Dry operation>
• Depending on the indoor unit used, the remote controller may have a [Dry]
indicator on its display even though the unit does not have the Dry
function. (Same as cooler operation)
• When the room temperature approaches the temperature setting, the unit
continues to start up or stop automatically.
• When the drying mode stops operating, the indoor unit's fan blows a gentle
breeze in order to keep the moisture from returning to the room at a
minimum.
• Depending on the indoor unit used, and/or the temperature in the room, the
fan speed may not be adjustable.
• Depending on the unit used, when the outside air temperature is 15 °C or
less, the dry function will not operate.
or Medium .
, switch
13
(EN)