How To Select The Model - Haier HWD-D1200TXVE-S Service Manual

SERVICE MANUL
HWD-D1200TXVE-S
2.

How to select the model

This PCB(Part code:0024000044)is a multi versatile PCB,suitable for use in current
models:HWD-C series and HWD-D series.Having replaced the PCB,it should be configured
to suit the customers particular washing machine,as detailed below:
1.Press the extra rinse button and power on at the same time.Keep the extra rinse button
pressed for 4 seconds.Then 1298 will be displayed on the screen.
2.Press speed button to select the correct model(1298 1098).Select a model then press temp
button to save.
3.Turn off the machine by pressing the power off button.
4.If the wrong model has been selected,you can reset the model by following the below steps:
Start the setting program.
Turn program knob to drain program.
Press speed button to select a correct model.
Press temp button to save the selected model.
Turn off the machine by pressing the power off button.
Model Explanation:
1298 is suitable for HWD-C/D1200TXVE;1098 is suitable for HWD-C/D100TXVE.
Washing Machine