Panasonic TC-P60VT60 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Plasma TV
  5. TC-P60VT60
  6. Service manual

Panasonic TC-P60VT60 Service Manual

60 inch class 1080p plasma hdtv
Hide thumbs Also See for TC-P60VT60:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Manual Del Usuario
For detailed troubleshooting information and circuit explanations,
refer to the "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical
Guide(TG) documents posted on the TSN web site.
For information about this model, type TC-P2013 in the model box under "Direct Search".
60 inch Class 1080p Plasma HDTV
TC-P60VT60
Model No.
GPF16DU Chassis
© Panasonic Corporation 2013.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.MTNC130362CE
B34 Canada: B62

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-P60VT60

Summary of Contents for Panasonic TC-P60VT60

  • Page 1 "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical Guide(TG) documents posted on the TSN web site. For information about this model, type TC-P2013 in the model box under "Direct Search". © Panasonic Corporation 2013. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 2 Warning --------------------------------------------------------------4 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------4 2.2. About lead free solder (PbF) ----------------------------5 3 Service Navigation------------------------------------------------6 3.1. PCB Layout --------------------------------------------------6 4 Specifications ------------------------------------------------------7 5 Technical Descriptions------------------------------------------8 5.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.

  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.

  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function Power Supply Main AV input, processing Remote receiver, Power LED, C.A.T.S sensor Data Driver (Lower Right) Data Driver (Lower Center) Data Driver (Lower Left) Scan Drive Sustain Drive Sustain out (Lower) Scan out (Upper) Non serviceable.

  • Page 7: Specifications

    3D Eyewear Battery Coin-shaped lithium battery CR2025 Operation time: Approx. 75 hours in continuous use of the battery made by Panasonic • Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. Note • Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

  • Page 8: Technical Descriptions

    5 Technical Descriptions 5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine 5.1.1. General information: 1. NAND Flash (IC8900) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for CinemaNow. 2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC (IC8000) and NAND Flash (IC8900).

  • Page 9: Service Mode

    6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds Note: Service Mode can not be entered when 3D signal input.

  • Page 10: Contents Of Adjustment Mode

    Contents of adjustment mode 6.1.4. • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...

  • Page 11: Option - Mirror

    6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.

  • Page 12: Hotel Mode

    6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Input Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched on.

  • Page 13: Data Copy By Usb Memory

    6.5. Data Copy by USB Memory Note: SD card can not be used for Data Copy. 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to other TVs.
  • Page 14 6.5.3. Data copy from TV set to USB Memory 1. Turn on the TV set. 2. Insert USB Memory with a startup file (pwd file) to USB terminal. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to USB Memory.
  • Page 15 6.5.4. Data copy from USB Memory to TV set 1. Turn on the TV set. 2. Insert USB Memory with Data to USB terminal. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from USB Memory to TV set.

  • Page 16: Troubleshooting Guide

    7 Troubleshooting Guide For detailed troubleshooting information and circuit explanations, refer to the "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical Guide(TG) documents posted on the TSN web site. For information about this model, type TC-P2013 in the model box under "Direct Search".

  • Page 17: Service Fixture & Tools

    8 Service Fixture & Tools 8.1. SC jig Purpose: To find the failure board (SC or SU/SD) when the power LED is blinking 7 times. SC jig: Jumper connector to connect to SC50 connector on SC board Part number: TZSC09187 How to use: Caution: Remove SC jig from SC board after inspection.

  • Page 18: Disassembly And Assembly Instructions

    9 Disassembly and Assembly Instructions 9.1. Disassembly Flow Chart for the Unit This is a disassembly chart. When assembling, perform this chart conversely.

  • Page 19: Disassembly Procedure For The Unit

    9.2. Disassembly Procedure for the Unit 9.2.1. Remove the Pedestal stand 9.2.4. Remove the Wi-Fi module 1. Remove the Plasma panel section from the servicing 1. Remove the screw (×1 ) and remove the Wi-Fi stand and lay on a flat surface such as a table (covered module.

  • Page 20: Remove The Rear Cover

    9.2.7. Remove the Rear cover 9.2.9. Remove the P-Board , ×2 Caution: 1. Remove the screws (×33 To remove P.C.B. wait 1 minute after power was off for 2. Remove the M8 caps (×4 discharge from electrolysis capacitors. 3. Remove the Rear cover. 1.
  • Page 21 9.2.10. Remove the A-Board 9.2.11. Remove the Control unit assy 1. Unlock the hooks and the tapes to free the cables. 1. Unlock the tape to free the cables. 2. Disconnect the connectors (A1, A6, A8A and A12). 2. Disconnect the connector (C14). 3.

  • Page 22: Remove The Woofer

    9.2.13. Remove the Woofer 9.2.15. Remove the Fan 1. Unlock the hooks and the tapes to free the cables. 1. Unlock the hooks and the tapes to free the cables. 2. Disconnect the Relay connector. 2. Remove the screws (×3 each).
  • Page 23 9.2.17. Remove the SD-Board 9.2.19. Work instructions for the Rubber sheet for SC-Board 1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and SD5) connected to the SD-Board. 1. Rubber sheets are put between the board and rear cover 2. Disconnect the flexible cable (SU11-SD11) and the bridge for EMC requirement and heat radiation.
  • Page 24 9.2.21. Work instructions for the Rubber 9.2.24. Remove the Metal bracket bottom sheet for SS-Board , ×2 1. Remove the screws (×6 ) and the Metal bracket bottom. 1. Rubber sheets are put between the board and rear cover for EMC requirement and heat radiation. Confirm rubber sheets were placed at each portion when assembling as shown in figure.

  • Page 25: Remove The Contact Metals

    9.2.27. Remove the Cabinet assy from the 9.2.29. Remove the C1-Board Plasma panel section 1. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and CB5). 1. Remove the Plasma panel section from the servicing 2. Disconnect the flexible cable (C10). stand and lay on a flat surface such as a table (covered 3.

  • Page 26: Replace The Plasma Panel

    9.2.32. Replace the Plasma panel Caution: Remove the Plasma panel section from the servicing stand and lay on a flat surface such as a table (covered by a soft cloth) with the Plasma panel surface facing downward. A new Plasma panel itself without Contact metals is fragile. To avoid the damage to new Plasma panel, carry a new Plasma panel taking hold of the Contact metals.

  • Page 27: Measurements And Adjustments

    10 Measurements and Adjustments 10.1. Adjustment 10.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.

  • Page 28: White Balance Adjustment

    10.1.2. White balance adjustment Name of measuring instrument Remarks Color analyzer (Minolta CS-1000 or equivalent) Procedure Remarks 1. Enter the Service mode. 2. Receive the Analog-RF (except for no signal) or set CVBS/YUV/HDMI (no signal is available). 3. Select [WB-ADJ] by using [1] and [2] key in the remote controller. 4.

  • Page 29: Block Diagram

    11 Block Diagram 11.1. Main Block Diagram MAIN AV INPUT,PROCESSING HDMI1-3 (HDMI2) TMDS DATA ETHERNET DATA HDMI I/F LAN CON I/F ETHERPHY ETHERNET ARCOUT SD CARD DATA IF_P/N SD CARD I/F SD CARD TUNER IF_P/N USB_DP/DN PEAKS PRO4 USB3-HDD USB0-3_DP/DN USB_DP/DN USB1 USB_DP/DN...

  • Page 30: Block (1/4) Diagram

    11.2. Block (1/4) Diagram JK8600 SPEAKER_L SPEAKER_R WOOFER D3101 SD CARD DIGITAL JK8602A JK8603B JK8606B JK8607 JK8601B JK8605 JK4701B JK4702B JK4703B AUDIO TU6706 ETHERNET USB3-HDD USB1 CAMERA USB2 WiFi MAIN AV INPUT,PROCESSING ANT IN HDMI1 HDMI2 HDMI3 TUNER DMD_ IIC0 IC4900 IC4901 AUDIO AMP...

  • Page 31: Block (2/4) Diagram

    11.3. Block (2/4) Diagram MAIN AV INPUT,PROCESSING X9500 20MHz IC9500 IC9300 PD6H LVDS DATA LVDS DATA LVDS RX LVDS TX VIDEO DATA IC9503 GCX1.1V PLASMA AI GCX1.1V DCDCGCX F15V VIDEO DATA SYSTEM_BUS LVDS DATA PA2001 H/V Sync Control VIDEO DATA 1.1V +1.1V Sub Filed Processor...

  • Page 32: Block (3/4) Diagram

    11.4. Block (3/4) Diagram POWER SUPPLY COLD COLD Q300-Q303 D105 F102 Q600 RESONANCE T301 D600 Q100 IC600 L100 Q101 L101 T303 CONTROL ERROR DET Q102 Q103 T302 Q701 D700 Q702 IC100 D704 Q601 DRIVER IC300 Vsus Q602 Vsus RESONANCE D302 CONTROL SS11 Q004...

  • Page 33: Block (4/4) Diagram

    11.5. Block (4/4) Diagram SCAN DRIVE SCAN OUT (UPPER) SUSTAIN DRIVE Reference Voltage SRV_VF5V TPVSUS Vsus Lo : 210V SRV_VSUS Vsus Hi : 215V IC16784,85 IC14601-03 Reference Voltage Vsus Vad = 195 5V(VFG_BASE) PC16897 Reference Voltage SRV_VFO Vsus Lo : 210V SVR_VSUS TPVSUS IPD CIRCUIT...

  • Page 35: Wiring Connection Diagram

    12 Wiring Connection Diagram 12.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 12.2. Wiring (1)

  • Page 36: Wiring (2)

    12.3. Wiring (2)

  • Page 37: Wiring (3)

    12.4. Wiring (3)

  • Page 38: Wiring (4)

    12.5. Wiring (4) 12.6. Wiring (5)

  • Page 39: Wiring (6)

    12.7. Wiring (6)

  • Page 40: Wiring (7)

    12.8. Wiring (7)

  • Page 41: Wiring (8)

    12.9. Wiring (8)
  • Page 42 Model No. : TC-P60VT60 Exploded View 1 1 / 3...
  • Page 43 Model No. : TC-P60VT60 Exploded View 2 2 / 3...
  • Page 44 Model No. : TC-P60VT60 Accessories 3 / 3...
  • Page 45 Print Parts List Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks TXN/A1UDUUS CIRCUIT BOARD A 1 (RTL)PAVCA TZRNP06UDUU CIRCUIT BOARD C1 1 (RTL)PAVCA TZRNP07UDUU CIRCUIT BOARD C2 1 (RTL)PAVCA TZRNP08UDUU CIRCUIT BOARD C3...
  • Page 46 1 PAVCA C2000 F1G1E103A059 C 0.01UF 25V C2001 F1J1A106A043 C 10UF, 10V C2002 F1J1E105A287 C 1UF, 25V 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C2006 F1G1C104A077 C 0.1UF 16V...
  • Page 47 C 1UF 10V C5016 F1G1A105A047 C 1UF 10V C5017 F1G1A105A047 C 1UF 10V C5018 F1G1C104A077 C 0.1UF 16V Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C5020 F1G1E103A059 C 0.01UF 25V...
  • Page 48 Print Parts List Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C8232 F1G1C104A077 C 0.1UF 16V C8233 F1G1C104A077 C 0.1UF 16V C8234 F1G1C104A077 C 0.1UF 16V C8235 F1G1C104A077 C 0.1UF 16V...
  • Page 49 C9235 F1G1E104A145 C 0.10pF 25V 1 PAVCA C9237 F1J0G2260001 C 22 UF 4 V C9238 F1J0G2260001 C 22 UF 4 V Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9239 F1J0G2260001...
  • Page 50 C 10UF, 10V C9416 F1G1C104A077 C 0.1UF 16V C9417 F1J1A106A043 C 10UF, 10V C9418 F1G1C104A077 C 0.1UF 16V Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9419 F1J1A106A043 C 10UF, 10V...
  • Page 51 C 1.5UF, 250V C16202 F0C2E155A252 C 1.5UF, 250V C16203 F0C2E155A252 C 1.5UF, 250V C16242 F1H1C105A145 C 1 uF 16 V Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C16243 ECJ1VB1H103K C 0.01UF, 50V...
  • Page 52 C 1.5UF, 250V C16632 F0C2E155A252 C 1.5UF, 250V C16633 F0C2E155A252 C 1.5UF, 250V C16641 F1K2J102A058 F1K2J1020001 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C16646 F1K2J222A024 C 2200PF, 630V...
  • Page 53 C 0.22UF, 250V C17272 F1H1A105A099 C 1UF, 10V C17277 F1L2E224A028 C 0.22UF, 250V C17303 F1H1A105A099 C 1UF, 10V Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C17304 F1H1A105A099 C 1UF, 10V...
  • Page 54 DIODE D16002 B0ECKP000061 DIODE 1 PAVCA D16004 B0ECKP000061 DIODE 1 PAVCA D16005 B0ECKP000061 DIODE 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks D16021 B0FCBN000003 DIODE 1 PAVCA D16022 B0FCBN000003...
  • Page 55 D16674 B0ECHR000004 DIODE D16676 DA2J10100L DIODE D16685 DA2J10100L DIODE D16686 DA2J10100L DIODE D16711 B0ECHR000004 DIODE Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks D16712 B0ECKP000055 DIODE D16713 B0ECHS000002 DIODE D16714 B0ECHS000002...
  • Page 56 1 PAVCA IC9304 TVRT156S 1 PAVCA IC9400 C0JBAZ001120 IC9401 C0JBAZ001120 IC9402 C0JBAZ001120 IC9500 MN85063A 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks IC9501 C3ABTY000097 1 PAVCA IC9502 C3ABTY000097 1 PAVCA...
  • Page 57 PEAKING COIL L16303 G0C471MA0049 PEAKING COIL L16411 G0CR43K00001 1 PAVCA L16412 G0CR43K00001 1 PAVCA L16430 G0ZZ00002183 PEAKING COIL Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks L16431 G0ZZ00002183 PEAKING COIL L16432 G0ZZ00002183...
  • Page 58 Q501 B1ABDF000026 TRANSISTOR Q502 B1CHRD000080 TRANSISTOR 1 PAVCA Q503 B1ADCF000172 TRANSISTOR 1 PAVCA Q505 B1ABDF000026 TRANSISTOR Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks Q506 B1ABDF000026 TRANSISTOR Q507 B1CFGF000019 1 PAVCA...
  • Page 59 Print Parts List Q16621 B1JAEN000011 TRANSISTOR Q16622 B1JAEN000011 TRANSISTOR Q16623 B1JAEN000011 TRANSISTOR Q16646 B1CFGF000019 1 PAVCA Q16647 B1CBGD000001 Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks Q16648 DSC2001Q0L TRANSISTOR Q16652 B1ADCE000027 TRANSISTOR Q16660...
  • Page 60 M 100 OHM,J,1/10W R531 D1JBR470A090 M 0.47 OHM,J,1/10W 1 PAVCA R532 D0GB102JA065 M 1KOHM,J,1/10W R533 D0GD102JA052 M 1.0KOHM,J,1/8W Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R534 D0GB102JA065 M 1KOHM,J,1/10W R535...
  • Page 61 M 5.6KOHM, J,1/10W 1 PAVCA R737 D0GB104JA065 M 100KOHM J 1/10W R738 D0GB102JA065 M 1KOHM,J,1/10W R739 D0GB104JA065 M 100KOHM J 1/10W Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R740 D0GB102JA065 M 1KOHM,J,1/10W...
  • Page 62 Print Parts List Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R2019 D0GA101JA039 M 100 OHM, J,1/16W 1 PAVCA R2039 D0GA103JA039 M10KOHM, J.1/16 W 1 PAVCA R2040 D0GA102JA039 M1KOHM, J.1/16 W...
  • Page 63 M 270 OHM,F.1/16 W 1 PAVCA R8236 D1BA2700A023 M 270 OHM,F.1/16 W 1 PAVCA R8237 D1BA2700A023 M 270 OHM,F.1/16 W 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8238 D1BA2700A023 M 270 OHM,F.1/16 W...
  • Page 64 M 36 OHM, J,1/16W R8637 D0GA272JA023 M 2.7KOHM, J.1/16W R8638 D0GA272JA023 M 2.7KOHM, J.1/16W R8639 D0GA103JA039 M10KOHM, J.1/16 W 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8640 D0GA103JA039 M10KOHM, J.1/16 W...
  • Page 65 R9320 D0GA182JA023 M 1.8KOHM, J,0.063W R9321 D0GA105JA023 M 1M OHM, J,1/16W R9324 D0GA162JA023 M 1.6KOHM, J,1/16W 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R9325 D0GA162JA023 M 1.6KOHM, J,1/16W...
  • Page 66 M10KOHM, J.1/16 W 1 PAVCA R9672 D0GA102JA039 M1KOHM, J.1/16 W 1 PAVCA R9673 D0GA102JA039 M1KOHM, J.1/16 W 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R9677 D0GA103JA039 M10KOHM, J.1/16 W...
  • Page 67 D1H84704A041 NETWORK RESISTER 1 PAVCA R16242 D1H84724A041 NETWORK RESISTER 1 PAVCA R16244 D0GA223JA023 M 22K OHM J 1/16W Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16252 D0GF563JA048 M 56 KOHM,J,1/3W...
  • Page 68 R16822 D1BD8202A066 M 82KOHM,F.1/8W 1 PAVCA R16823 D1BD6192A066 M 61.9KOHM,F.1/8W 1 PAVCA R16824 D1BD3742A066 M 37.4KOHM,F.1/8W 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16825 D0GD104JA052 M 100KOHM,J,1/8W R16826 D0GA472JA023 M 4.7KOHM, J,1/16W...
  • Page 69 M 100 OHM,J,1/10W R17131 D0GF1R0JA047 M 1 OHM,J,1/3W R17133 D0GF1R0JA047 M 1 OHM,J,1/3W R17135 D0GF1R0JA047 M 1 OHM,J,1/3W Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R17145 D0GBR00J0004 M 0 OHM J 1/10W...
  • Page 70 Print Parts List R17397 D0GD151JA059 M 150 OHM,J,1/4W RL100A K6B1AYY00031 K6B1AYY00081 1 PAVCA RM2800 B3RBB0000018 REMOTE SENSOR Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks K1KY02C00002 2P CONNECTOR 1 PAVCA SC20...
  • Page 71 TQD2A19069 QUICK START GUIDE 1 PAVCA TSCKZ0040037 CABLE(A31-C21) 1 PAVCA TSCKZ0040039 CABLE(A32-C31) 1 PAVCA TSCKZ0040041 CABLE(A20-SC20) 1 PAVCA Model No. : TC-P60VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks TSCLZ0010051 CABLE(A33-SS33) 1 PAVCA TSXL724...

Table of Contents