Initial Selections; Selecting The Input Signal; Selecting The On-Screen Menu Language - Panasonic TH-37PH9UK Operating Instructions Manual

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 38)
• In 2 screen display, the same input mode cannot be selected for the main picture and
sub picture.

Selecting the On-Screen Menu Language

18
Press to select the input signal to be played back from
the equipment which has been connected to the Plasma
Display.
Input signals will change as follows:
• TH-37PH9UK
INPUT1 INPUT2
• TH-42PS9UK, TH-42PH9UK, TH-50PH9UK
INPUT1 INPUT2
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
PC IN
INPUT3 PC IN
.......(Chinese)
.......(Japanese)
.......(Russian)
Русский
TH-42PS9
INPUT MENU -/ VOL + / ENTER/
+
INPUT MENU -/ VOL / ENTER/
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE
OFF
STANDBY SAVE
OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
1/2