Kenwood DDX5016DAB Instruction Manual page 30

DIGITAL RADIO (DAB) DIGITAL RADIO (DAB)
Using the Replay function
You can temporarily record the broadcast from the
current time, and replay the recorded data.
• You can not use the Replay function ([REPLAY]
button is not available) in the following cases:
– When the data is not recorded.
– When receiving a service of the program type
selected for <PTY Watch>. (Page 31)
• When the recording capacity is full, the older
recorded data is deleted and recording continues.
• If you change to another channel during playback,
the recorded content will be lost.
30
❏ Entering the Replay mode
1 2 3
1 Progress bar
Shows the remaining capacity (gray) and the
amount of recorded data (blue). If you have
already recorded fully, the entire bar is indicated
in blue.
• Updated every second.
2 Time code
Shows you the point of Replay you are listening
to.
• Example: –5:00
– You are listening to data that is 5 minutes
behind the current broadcast.
• Updated every second.
3 Playback status (I: play / W: pause / O: rewind
/ N: fast forward)
Operation buttons
[S][T] • Skips back or forward by about 15
seconds. (Press)
• Jumps to the end or the beginning
of the recorded data. (Hold)
Rewind/Fast forward
[O] [N]
[IW] Starts/Pauses playback.
To exit the Replay mode (Returning to the
channel reception screen)