Sony SRS-ZR5 Help Manual page 121

position that provides enough signal strength.
When the connection is canceled temporarily, the speakers automatically reconnect. If it takes 10 minutes or more to reconnect after canceling,
the Wireless Stereo function is canceled. When using the Wireless Stereo function the next time, operate from step 1.
Note
The Wireless Stereo function is available when the software version of the speaker is 2.00 or later. If the Wireless Stereo function cannot be set,
the software version of speakers may not be latest. For the software version of the speaker, refer to SongPal. To update the software of the
speaker, see "Updating the pre-installed software."
When using the Wireless Stereo function, the automatic software update feature of the speakers is not activated. To update the software, cancel
the Wireless Stereo function, and then connect the speaker to the wireless network.
While using the Wireless Stereo function, one of speakers may inform you that the latest software is available (the UPDATE indicator lights up in
orange). In this case, update the software of the speaker whose UPDATE indicator lights up in orange. For details on how to update, see "Update
method 2: Manual update via the Internet." Grouping of the Wireless Stereo function is automatically canceled. Then, connect the other speaker to
the wireless network, and then update the software of the speaker. For details on how to update, see "Searching the latest software via a network
connection." After updating both speakers to the latest software, set the Wireless Stereo function again.
The speaker complies with content protection that uses the SCMS-T method. Music or sound using the SCMS-T method can be output from the
speaker, but cannot be output from both speakers with the Wireless Stereo function.
When using the Wireless Multi-room function on this speaker, the setting (grouping) for the Wireless Stereo function cannot be operated on this
speaker.
It is recommended to turn down the volume of the speaker which of pressing the STEREO PAIR button before setting the Wireless Stereo
function. The two speakers output sound for the Wireless Stereo function, so a louder sound may be output than that with playback with one
speaker.
Setting on SongPal is available when SongPal version is 4.0 or later. For more details on SongPal, refer to the following URL.
http://info.songpal.sony.net/help/
4-593-282-11(2) Copyright 2016 Sony Corporation
105