Daewoo DWD-FC1011 Service Manual page 56

■
DWD-FC1X9X SERIES
Power Button
Press this switch to turn the power on or off.
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the "Start/Pause" button
press the "Start/Pause" button again.
You can select the course you want, and each lamp is turned on when that course is
selected.
For the more detailed information, please refer to the page 11~18.
It can be used to adjust temperature of water according to types of the load to be
washed.
As the button is pressed, temperature of water is selected by
Cold 30˚C 40˚C 60˚C
By pressing the spin button, the spin speed can be chosen.
Rinse Hold • Is selected by pressing the spin button repeatedly. This function
leaves clothes in the machine; suspended in the water after a
rinse without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold
function is completed, use spin button.
Spin only • If you want only spin, you can operate spin only. (See page 18.)
Select the program that you want to change
95˚C
FUNCTIONS OF THE CONTROL PANEL 55