Charge Settings - Panasonic EB-SC3 Operating Instructions Manual

Charge settings

You can check the service charge settings or reset the settings.
d Main menu > Settings > Calls > Call Service > Charge
settings
1. [192] to scroll to the required setting 7 [5] (Select or
Change)
(If one of the settings except for Auto display is selected, go to
the next step.)
2. [5] (Edit) 7 Enter the PIN2 code 7 [5] (OK)
3. Follow the operation shown below:
Currency
Personal rate
Max cost
Auto display
Note: The duration of one unit may vary between peak and off-peak times.
Call charges can be calculated accordingly. However, the actual tariffs
charged by your network operator may not be reflected in the calculation.
You can set the currency unit in which your service rate is
determined. Firstly, Personal rate must be entered.
Enter the currency unit (max. 3 characters) 7 [5] (Save)
You can set your personal rate. This is the cost that the
service provider charges for one unit of call time.
[192] to scroll to Per unit: or Per min.: 7 Enter the
value 7 [5] (Save)
You can set the maximum cost of calls allowed.
To set the Display credit:
[192] to scroll to Display credit 7 [6] (Change) to
switch on/off 7 [5] (Save)
To set the Max cost:
[192] to scroll to Max cost 7 Enter the credit limit 7
[5] (Save)
In Idle mode, the cost of the last dialled call is displayed
automatically.
Settings
81