Charging The Battery - Panasonic EB-GD92 Series Operating Instructions Manual

Getting Started
Removing the Battery
Push the battery release latch down (1).
The base of the battery will raise out of
the recess (2). The battery can now be
removed from the phone (3).
Charging the
Battery
Connecting the AC
Adaptor
The battery pack must be attached to
the phone before the AC Adaptor is
connected. Insert the AC Adaptor plug
into the base of the phone (1).
Note: DO NOT force the connector as
this may damage the phone and/or the
AC Adaptor.
Connect the AC Adaptor to the mains power supply (2). Indicator will light and
charging starts.
Operation of Battery Level Indicator
Telephone on
Telephone off
When charging is complete remove the AC Adaptor.
Disconnecting the AC Adaptor
Disconnect the AC Adaptor from the
mains power supply (1).
Squeeze together the two buttons on
the plug of the AC Adaptor (2) and while
maintaining pressure extract the plug
from the base of the phone (3).
2
Œ
Œ
While charging
K
K


Charging complete
H
Indicator off

Ž
Ž

Œ