System Snmp Access Edit <Rowid - D-Link DWC-2000 Cli Reference Manual

4 agent
5 subnet_mask
6 accessType
7 community
4.18 system snmp access edit <rowid>
Command
S.No
Name
1 <rowid>
2 save
3 exit
4 cancel
5 agent
6 subnet_mask
7 accessType
8 community
The IP address of the SNMP agent.
The network mask used to determine the
list of allowed SNMP managers. To allow
any IP on the network to manage the
device, enter 255.255.255.0. For a
specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
Which SNMP trap port that the trap
messages will be sent to.
The community string to which the agent
belongs. Most agents are configured to
listen for traps in the Public community.
Description
SNMP configuration mode.
Save SNMP access control configuration
changes.
Save SNMP access configuration
changes and exit current mode.
Roll back SNMP configuration changes.
The IP address of the SNMP agent.
The network mask used to determine the
list of allowed SNMP managers. To allow
any IP on the network to manage the
device, enter 255.255.255.0. For a
specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
Which SNMP trap port the trap messages
will be sent to.
The community string to which the agent
belongs. Most agents are configured to
listen for traps in the Public community.
65
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
SNMP access type for
SNMP community.
String
Type and Description
Unsigned integer.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
SNMP access type for
SNMP community
String