Security; Pin Code; Pin Code Request; Call Restrictions - Nokia 6275I User Manual

9251758_6275i_1_en_au_oth_v1.0.fm Page 59 Tuesday, August 22, 2006 10:24 PM
Default profile—Choose the profile you
wish to be automatically activated
when a headset, car kit, or loopset is
connected.
Automatic answer—Answer calls
automatically after one ring when a
headset, car kit, loopset, or charger is
connected. Select On or Off.
Note: Automatic answer will
only be active whilst
profile is active.
Lights (for Handsfree or
only)—Choose to keep the phone lights
always on, or to shut off automatically
after several seconds. Select
Automatic.
If the Loopset is connected and
recognised through the Pop-Port™
connector, the phone automatically
uses the Loopset.

■ Security

PIN code

The PIN code protects the UIM card
from unauthorised access. The PIN
code can be 4–8 digits in length.
After three successive incorrect
entries, the PIN code is blocked.
You need to enter the personal
unblocking key (PUK) code.
See "Personal unblocking key (PUK)
code", p. 61.
Note: The PIN code must be
obtained form your wireless
service provider or network
operator. The PIN code is
typically provided with your
UIM card.

PIN code request

To provide extra security in case your
phone is lost or stolen, enable your
General
phone to request the PIN code when
powered on.
Charger
1. In standby mode, select
Settings >
request.
On or
2. Enter the PIN code, and select OK.
3. Select On.

Call restrictions

Select call restrictions to block or allow
numbers for incoming and outgoing
calls. With any numbers entered as
allowed numbers, all those entered as
blocked numbers are ignored. With a
number blocked, the phone blocks any
call from it, and send the caller to the
voice mail.
1. In standby mode, select
Settings >
restrictions.
2. Enter the security code, and select
OK. See "Security", p. 59.
3. Select the types of calls you want
to restrict:
S e t t i n g s
Menu >
Security > PIN code
Menu >
Security > Call
59