Table of Contents
Advertisement
If a message regarding a blocked sensor
appears in the information display, the radar
signals from the sensor have been
obstructed. The sensors are located behind
a fascia cover near the driver side of the
lower grille. When the sensors are
The surface of the radar in the grille is dirty or obstructed in some
The surface of the radar in the grille is clean but the message remains
in the display
Heavy rain, spray, snow, or fog is interfering with the radar signals
Swirling water, or snow or ice on the surface of the road may interfere
with the radar signals
MKT (), enUSA, First Printing
Driving Aids
obstructed, a vehicle ahead cannot be
detected and the collision warning system
does not function. The following table lists
possible causes and actions for this message
being displayed.
Cause
way
Clean the grille surface in front of the radar or remove the object
causing the obstruction
Wait a short time. It may take several minutes for the radar to detect
that it is no longer obstructed
The collision warning system is temporarily disabled. Collision warning
should automatically reactivate a short time after the weather condi-
The collision warning system is temporarily disabled. Collision warning
should automatically reactivate a short time after the weather condi-
231
Action
tions improve
tions improve
Advertisement
Table of Contents
