System Reset; Setup Menus - Raymarine T300 Operation And Setup Manual

3.6 System reset

Resetting the JCU
Use this procedure to reset the JCU without the need for a power
cycle.
1. Press and hold the SCENE, COLOR and HOME buttons for
1 second.
Resetting the thermal camera
Use this procedure to reset the thermal camera. This will realign the
home and stow positions, for example if they become misaligned
due to heavy weather.
1. Use 4 successive "Camera Home" operations to reset the
camera.
Restoring factory defaults
Use this procedure to reset the camera to its factory default settings.
With the camera setup menu displayed:
1. Select the About/Help menu.
2. Select Restore Factory Defaults from the available options.
26

3.7 Setup menus

The setup menus provide a range of tools and settings to configure
the thermal camera.
The menus can be accessed from any controller on the system. The
menus are overlaid onto the video image.
Note: The on-screen menus only appear on the thermal camera
image. They are not available when viewing the visible light
image (on dual payload models).
Menus available
Video Setup This menu is used to set the video configuration
options.
Set Symbology Settings associated with the status icons.
User Programmable Configure the USER button on the JCU.
Button
System Setup Settings to optimize operation for this particular system
/ installation.
Surveillance Mode Set the scan width and speed for surveillance mode
operation.
About / Help
Exit
Video setup menu
Menu item / Description Settings / Operation
Set Thermal Color This saves the current color setting as the default
Default value.
Set Reverse Video This toggles the infrared image between white-hot
Default (or red-hot if viewing a color image) and black-hot.
T-Series thermal cameras – Operation and setup