This illustration shows the typical
connection points for different
types of equipment.
MP3 player – 3.5mm jack
CD/DVD/Media Player – L+R Phono
Instrument – MIC/LINE1 (Jack)
Microphone – MIC/LINE1 or 2 (XLR)
This illustration shows typical
connection for using as monitor
before sending the signal out to an
active PA speaker, for using with a
large venue/audience.
Connect your microphone, instrument
and/or any additional music source
(such as CD/MP3 player) to the
appropriate channel input. Use the
THRU connector to link the ASM5D to
the active PA speakers input.
Configuration Examples
This illustration shows typical
connection for using as floor
monitors.
This can be done as a stereo L+R for a
keyboard player using MAIN IN on each
ASM5D for either L or R signal.
Or as a general stage monitor and send
a mono signal to MAIN IN on the 1
ASM5D and use the THRU connector to
link out to the next ASM5Ds MAIN IN.
8
st