1070 Speaker - Lenovo PB1-750M Hardware Maintenance Manual

Lenovo PHAB Hardware Maintenance Manual

1070 Speaker

For access, remove the following FRUs in order:
• "1010 Rear cover and side key" on page 34
• "1020 Battery pack" on page 38
1. Desolder the wires of the speaker from the USB board at the positions shown
2. Remove the speaker box using a triangle paddle as shown in the figure
50
in the figure below.
Figure 7-1. Positions for desoldering the wires of the speaker
below.
Figure 7-2. Removing the speaker box