Selecting The Clock Display; Initial Time; Time Reset; Clock Setting - Panasonic CQ-5335U Operating Instructions Manual

Clock Setting

Selecting the Clock Display

Press [CLK] (clock) to switch clock and alarm time
display both.
clock display Alarm time display
Note: if no operation takes place for more than 5
seconds in alarm time, the display returns to the
clock display.
CLK
CLK
PWR
ALM
PUSH SEL/SAT
DISP
VOL
MODE
BAND
BASS/TREB/BAL/FADER
APM
Time Setting
q Press and hold [CLK] (clock) and do not release
to set time. Display blinks and the time setting
mode is activated.
Hours
w Press [{] to set the hour.
Minutes
e Press [}] to set the minute.
r Once the time has been set, release [CLK].
Note: Press and hold [{ ] or [} ] to change
numbers rapidly.
CQ-5335U
DISC CD SCAN
1 2 3
(blink.)
(Hours set.)
(Minutes set.)
(End.)
The 12-hour system is used for the clock.

Initial Time

"SET" is displayed when the clock is not adjusted.
LOUD
MUTE
TUNE TUNE
SEEK SEEK
RPT RDM
SCAN
4 5 6
ILL
[{ TUNE], [} TUNE]
(Hours, Minutes)

Time Reset

When you want to reset the time, repeat steps q to
r.
Note: the current time will be displayed at all the
time even the power of the radio is turned off.
7
CQ-5335U