Table of Contents
Advertisement
After deepstop is over, the user can change between deepstop and
the timer by long pressing the MODE button.
Deepstops are presented the same way as safety stops. Suunto DX
notifies you that you are in the deepstop area by displaying:
CEILING in the top
•
DEEPSTOP in the center row
•
Stop depth
•
Countdown timer
•
Deepstop is on by default in Air and Nitrox modes. To turn
deepstop off:
1. While in a dive mode, keep [DOWN] pressed.
2. Press [DOWN] to scroll to Deepstop and enter with [Select].
3. Press [UP] to toggle on/off.
4. Press [MODE] to exit.
3.20 Software version
You can check the software version and battery status of Suunto DX
under the general settings.
1. While in time mode, keep [DOWN] pressed.
2. Press [UP] to scroll to Version and press [SELECT].
57
Advertisement
Table of Contents
