Setting The Date And Time And Adjusting The Lcd Monitor - Panasonic SDR-SW21P Operating Instructions Manual

Setup
Setting the date and time
Before recording, check that the date and time have been set.
The very first time that power is turned ON, a message appears prompting you
to set the date and time. Select [YES], press the center of the cursor buttons
and proceed to step
To change the date and time
display
● To change an item
[DATE/TIME]
[OFF] : Date and time are not
displayed.
[D/T] : Date and time are
displayed.
[DATE] : Only the date is displayed.
● To change the date format
[DATE FORMAT]
Format
indication
[Y/M/D]
[M/D/Y]
[D/M/Y]
30
VQT2A17
6
Setting the date and time
.
3
→[SETUP]→
→[SETUP]→
Appearance on
LCD monitor
2009.DEC.15
DEC.15.2009
15.DEC.2009
1
Set to [ ] or [ ].
Select the desired menu.
2
→[BASIC]→
[CLOCK SET]→[YES]
Set the date and time.
3
To select settings
The year is displayed up to 2099
and the 12-hour system is used
to display the time.
Enter the date and time.
4
• The clock function starts at [00]
seconds.
• After pressing the [MENU]
button and closing the menu,
check the date and time
displays.
To change
numerical values