Precor P80 Operating And Maintaining page 40

38
To clear the Channel Guide completely:
1.
2. When asked "Delete All Channels?", verify that you want
Table 7. TV Settings
Settings
Channel Guide
Region
Default Channel
Volume
Correction
Skip Unnamed
Channels
Extensive Scan
Closed Captioning Select ON if you want closed
Export/Import
Channel Names
Editing the Export/Import Channel File
Note: You will need to scan for channels before you can
export the file. If you have not scanned for channels, refer to
Channel Configurations in the preceding section.
Exporting the channel list from the fitness equipment creates
a file called channel-guide.json. This file can be used to specify
channel names in languages that are not yet supported by the
P80 console.
To export this file from your console:
1.
2. Insert a USB drive into the console.
3. On the Settings menu, touch System Settings.
On the Channel Guide screen, touch Delete All.
to proceed, then touch Delete All again.
Detail
Use to scan basic channels
Select the appropriate region for your
location.
Set a default channel for the
equipment. This is the channel that
will display when the TV is turned on.
Allows for volume adjustment of
analog channels to match digital
channels
Use to screen out channels that are
not valid or encrypted.
Run to identify analog channels
missed by the basic scan or channels
with weak signals. Takes up to two
hours to complete.
captioning to appear on your TV
screen.
Import the channel names once a
basic channel scan is complete.
Enter your code to view System Settings. To locate your
code, refer to Configuring the System Settings.
Operating and Maintaining the P80 Console
Default
United
States
0
On
Off
On
Blank