Other Digital Functions - Panasonic Palmcorder MultiCam PV-DV203 Operating Instructions Manual

Other Digital Functions

Use the following features to add interest
and professionalism to your recordings or
playback. Select from twelve special
effects.
3, 4, 5
JOG KEY
2
MENU
1
POWER
Types of Digital Functions
MIRROR
Symmetrical image from the current camera
picture.
STROBE
The recording appears as a sequence of
still frames.
MOSAIC
The picture appears in a mosaic pattern.
SLIM
The picture is expanded vertically.
TRAIL
The subject being recorded creates a trail
when in motion.
STRETCH
The picture is expanded horizontally.
GAIN UP (Not available during playback)
Picture sensitivity is increased.
• The image will be brighter than normal,
however motion jitter will occur.
WIPE (Not available during playback)
Successive scenes are separated in a way
which simulates the drawing of a curtain.
MIX (Not available during playback)
The current scene is mixed in with the
following scene during scene changes.
P-IN-P (Not available during playback)
PinP (Still image) is displayed on the
Main Picture.
SEPIA (Only available during playback)
The picture is played back in sepia, a
brownish color, giving it an antique look.
B/W (Black-and-white) (Only available
during playback)
The picture is played back in black-and-
white.
Digital Features
1
Set POWER to CAMERA or VCR.
2
Press MENU to display the menu
screen.
3
Rotate JOG KEY to select
EFFECT in the CAMERA or VCR
mode menu screen, then press JOG
KEY to display the DIGITAL EFFECT
menu screen.
4
Rotate JOG KEY to select
the CAMERA mode menu screen or
EFFECT1 / EFFECT2
mode menu screen, and then press
JOG KEY repeatedly to select one of
the Digital Functions listed on the left.
5
To cancel the Digital Function, press
JOG KEY repeatedly to select OFF.
Note
• The EIS and Digital Zoom features are
turned off automatically when one of
the Digital Functions listed at left is
selected.
To use the WIPE function
a. In Camera mode, set the "EFFECT" item
in the main menu screen to "WIPE".
(Menu OSD: p. 108)
b.Press REC/PAUSE to start recording.
c. Press REC/PAUSE to pause the
recording. The last scene will be
memorized.
d.Press RECORD/PAUSE to start
recording again. The new scene will take
the place of the memorized scene.
To use the MIX function
a. In Camera mode, set the "EFFECT" item
in the main menu screen to "MIX".
(Menu OSD: p. 108) Then, perform steps
b-d above.
The memorized scene and the new
scene will appear mixed as the scene
changes from one to the other.
Note
• When Photo Title is set, WIPE/MIX mode
becomes Photo Title. When Photo Title
is finished, Digital Function turns OFF.
DIGITAL
EFFECT in
in the VCR
43