Service And Repairs - Hitachi NV45AB2 Instruction And Safety Manual

English
6. WARNING LABEL
Change the WARNING LABEL if missing
or damaged.
A new WARNING LABEL is available from
a Hitachi authorized service center.
Warning
label
7. Maintenance chart (page 23)
8. Operator troubleshooting (pages 23 – 24)
9. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION
Repair, modification and inspection of
Hitachi Power Tools must be carried out
by an Hitachi Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the Hitachi Authorized
Service Center when requesting repair
or other maintenance. In the operation
and maintenance of power tools, the
safety regulations and standards
prescribed in each country must be
observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being
improved and modified to incorporate the
latest technological advancements.
Accordingly, some parts (i.e. code numbers
and/or design) may be changed without prior
notice.

SERVICE AND REPAIRS

Only service personnel trained by
Hitachi, distributor or employer shall
repair the Nailer.
Use only
recommended by Hitachi for repair.
All quality Nailers will eventually require
servicing or replacement of parts because
of wear from normal use.
NOTE:
Specifications are subject to change
without any obligation on the part of
HITACHI.
— 22 —
WARNING
parts supplied or