Hardware Installation - Vivotek FD816C-HF2 User Manual

Hardware Installation

1. Jot down the camera's MAC address for later reference. This is important if you have
multiple cameras at one installation site.
1
Network Camera
Model No: XXXXXX
MAC: 0002D1083236
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Pat. 6,930,709 Made in Taiwan
2. Drill a hole on ceiling or wall. The diameters for the installations with or without the
retention tube are different.
2
w/ the retention tube
w/o the retention tube
Use the M3 self tapping screws if installed without the retention tube. Note that this type of
installation does not apply to hard surfaces, such as a concrete wall.
VIVOTEK
50mm
45mm
User's Manual - 7