Manual Focus Adjustment; Lsqt1006 - Panasonic NV-GS27EB Operating Instructions Manual

ª
To restore to the automatic
adjustment
Move the joystick left or right until the [
indication appears. Or, set the [AUTO/MANUAL/
FOCUS] switch to [AUTO].
≥When the camera is turned on with the lens cap
fitted, the automatic white balance adjustment
may not function properly. Please turn the
camera on after removing the lens cap.
≥When setting both the white balance and the
iris/gain, set the white balance first.
≥Whenever recording conditions change, re-set
the white balance for correct adjustment.
ª
To set the white balance manually
Select [ ] in Step 3. Then, while viewing a white
subject on the entire screen, move the joystick up
to select the [ ] indication.
ª
About flashing of the [
When the manual adjustment mode is
selected
≥Flashing indicates that the white balance
previously adjusted is stored. This setting is
stored until the white balance is adjusted again.
When white balance cannot be set in the
manual adjustment mode
≥White balance may not be adjusted properly in
the manual adjustment mode in dark places. If
so, use the auto white balance mode.
During setting in the manual adjustment mode
≥When the setting is completed, it will keep lit.
ª
About the white balance sensor
The white balance sensor detects the type of light
source during recording.
≥Do not cover the white balance sensor during
recording, or it may not function properly.
Record mode

Manual focus adjustment

If auto focusing is difficult due to the conditions,
]
AWB
then manual focusing is available.
≥Set to Tape Recording Mode.
1
2
] indication
≥The MNL and the manual focus indication [MF]
3
≥When focused with a wide angle, the subject
ª
Set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] or [FOCUS].
Set the [AUTO/MANUAL/FOCUS] switch to
[MANUAL].
Set the [AUTO/MANUAL/FOCUS] switch to
[FOCUS].
MF MF MF MNL
will be displayed.
Move the joystick left or right in order to
adjust the focus.
MF MF MF
MNL
may not be in focus when zoomed in. First,
zoom in on the subject, and then focus on it.
To restore to the automatic
adjustment
AUTO
MANUAL
FOCUS
AUTO
MANUAL
FOCUS
29

LSQT1006