Accessories; Technical Data - Hilti UD 30 Operating Instructions Manual

2.6 Items supplied as standard
1 Power tool with side handle
1 Depth gauge
1 Chuck key (with keyed chuck)
1 Operating instructions
en
1 Hilti cardboard box or toolbox
2.7 Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate cross section.
The power tool may otherwise lose performance and the extension cord may overheat. Check the extension cord for
damage at regular intervals. Replace damaged extension cords.
Recommended minimum conductor cross section and max. cable lengths
Conductor cross section
Mains voltage 110‑120 V, UD 16
Mains voltage 110‑120 V, UD 30
2.8 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.9 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.

3 Accessories

The list of insert tools can be found in Section 2 under "Possible applications".
Designation
Keyless chuck
UD 16 keyed chuck
UD 16 chuck key (if keyed chuck is fitted)
UD 30 keyed chuck
UD 30 chuck key (if keyed chuck is fitted)

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Rated current input
Mains frequency
Weight of tool without side handle
4
16 AWG
50 ft
50 ft
Item number, description
274077
274080
274082
274079
274081
UD 16
120 V
8.0 A
50...60 Hz
2.4 kg (5.2 lbs)
14 AWG
100 ft
125 ft
UD 30
120 V
6.5 A
50...60 Hz
2.3 kg (5 lbs)
12 AWG
150 ft
200 ft