Remove The Front Wheel - BMW K1600GTL Rider's Manual

sensor. Be sure to draw the
8
attention of the authorised
BMW Motorrad dealer or
140
specialist workshop to the fact
that the wheel is fitted with an
RDC sensor.

Remove the front wheel

Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
z
Remove screws 1 on left and
right.
Pull the front-wheel cover for-
ward to remove.
Unclip retaining clip 1 holding
the sensor cable to the brake
line.
Remove cable tie 2.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
ATTENTION
Brake pads pushed together
with brake caliper removed.
It is not possible to slip the brake
caliper over the brake disc.
Do not operate the brake lever
while a brake caliper has been
removed.
Remove screws 3 of the brake
calipers on left and right.