3
Reset the Tape
Counter to zero.
(p. 60)
7
Turn the Movie Camera to the
title to be inserted and press the
Recording Start/Stop Button.
The Insert Editing automatically
stops approximately at the position
at which you reset the counter to
zero.
3
Press the Playback Button [1] to start audio
dubbing.
The Audio Dubbing automatically stops
approximately at the position at which you reset
the counter to zero.
BLC
4
After displaying the
[DISPLAY SETUP] Sub-
Menu... (p. 10)
Set [DISPLAY] on the
[DISPLAY SETUP]
Sub-Menu to [MEMORY].
MF/
TRACKING
FOCUS / SET
CAMERA
OFF
VCR
1
TBC
Remarks, etc.
≥Be sure to insert the cassette with an intact tab or if
the tab has been removed, cover the hole with an
adhesive tape.
Stopping Insert Editing
Press the Recording Start/Stop Button.
The Movie Camera is again in the Recording Pause
Mode.
Cancelling the Insert Editing Function
Press the [∫] Button.
≥It is not possible to set [INSERT] on the [OTHER
FUNCTIONS] Sub-Menu to [ON] when it is not in
the Still Playback Mode.
≥It is not possible to perform Insert Editing on an
unrecorded part of the tape. If you try to do so, the
tape will stop.
≥When pressing the [MENU] Button in the Recording
Pause Mode, the Menu of Camera Mode appears.
However, you cannot use the [MOTION SENSOR]
of the [CAMERA SETUP] Sub-Menu, [REC SPEED]
and [INTERVAL REC] of the [OTHER FUNCTIONS]
Sub-Menu.
Stopping Audio Dubbing
Press the [;] Button.
The Movie Camera is again in the Still Playback
Mode.
Cancelling the Audio Dubbing Function
Press the [∫] Button.
≥It is not possible to set [AUDIO DUBBING] on the
[OTHER FUNCTIONS] Sub-Menu to [ON] when it is
not in the Still Playback Mode.
≥It is not possible to perform Audio Dubbing on an
unrecorded part of the tape. If you try to do so, the
tape will stop.
≥When using the Audio Dubbing Function, the
picture quality is somewhat reduced. However, it
doesn't affect the recorded picture.
51