Adding Shot Marks To Clips; Select The Card Slot For Playback - Panasonic MEMORY CARD CAMERA-RECORDER AG-AF100P Operating Instructions Manual

Adding shot marks to clips

Adding shot marks ( ) will make it easier to find
M
the clips you are looking for.
1
Tilt the Operation lever in the
directions to move the yellow frame to the
clip for which a shot mark is to be added.
2
Press the USER button to which the shot
mark function has been allocated. (Page 55)
To release a shot mark, repeat the above steps.
• It is not possible to add shot marks to clips
recorded using a consumer camcorder model.

Select the card slot for playback

You can switch the SD memory card slot for
playback.
1
Press the SLOT SELECT button when the
THUMBNAIL screen is displayed in the PB
mode.
2
Tilt the OPERATION lever in the up, down,
left, and right directions to select the SD
memory card slot for playback. You can play
back still images as well.
VIDEO:
Movie playback
PICTURE:
Still picture playback
3
Push the OPERATION lever.
31