Headers & Jumpers - Albatron kx600s Instruction Manual

This Manual: http://www.manuallib.com/file/2538033
Headers & Jumpers
Front USB Headers: USB2/ USB3/ USB4
1 2
5VSB 5VSB
DATA_A- DATA_B-
DATA_A+ DATA_B+
Ground Ground
NC NC
9 10
USB2/3/4
USB bracket (optional)
An optional USB bracket may be included with your board. The bracket is typical secured to the back
side of your computer and has standard USB ports that you can connect to external USB devices. The
bracket will also have cables that you can extend to the USB2, USB3 or USB4 headers.
* If you are using USB 2.0 devices with Windows 2000/ XP, you will need to install the USB 2.0
®
driver from the Microsoft website.
OTP (Over Temperature Protection) Jumper: JP4
The mainboard supports a special design for CPU Over Temperature Protection. If this function is
"Enabled" and the CPU temperature rises above the normal range, the system will automatically shut
down and you have to unplug the ATX_PWR connector. Remove and reinstall the CPU heat sink
also check to make sure the CPU fan is working properly.
*OTP is only functional when using the Athlon XP
Pin1-2 short
Disable (default)
Pin2-3 short
Enable
(Short means to cover two pins on
a jumper using a jumper cap.)
TM
or the Barton
JP4
1
2
3
JP4
1
2
3
16
KX600S PRO/ KX600S
D IMM 1
D IMM 2
D IMM 3
TM
CPUs.
D IMM 1
D IMM 2
D IMM 3