TH-37PH9UK / TH-42PH9UK
7.8.
Removal of the DA-Board
1. Disconnect the couplers(PB30, PB31, PB33, PB35).
2. Remove the 2 screws and then remove the PB-Board
Block.
3. Disconnect the couplers(DA1, DA3, DA5, DA6).
4. Remove the Flexible Cable from the coupler(DA2).
5. Remove the 2 screws and then remove the DA-Board and
Fixed Plate.
Note:
A re-setup of the destination is performed by MS mode
after DA-Board exchange.
7.9.
Removal of the P-Board
1. Disconnect the couplers(P2, P5, P9, P10, P11, P12, P23,
P25)
2. Remove the 6 screws and then remove the P-Board.
7.10. Removal of the D-Board
1. Remove the Slot Block.
(Reference to Removal of the Slot Block)
2. Disconnect the couplers(D5, D20, D25)
3. Remove the Flexible Cable from the couplers (D3, D31,
D32).
4. Remove the 4 screws and then remove the D-Board.
7.11. Removal of the H3-Board (L,
R)
1. Remove the each 1 screw and then remove the Speaker
Terminal Block (L, R).
2. Disconnect the coupler(H37).
3. Remove the 3 screws (G) and then remove the H3-Board.
22