INSTALLATION
PROCEDURE
/ ASSEMBLING
AND
PREPAR
NG
11
INSTALLATION
PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4
Make sure the network
connection is available.
You can use the TV network
functions only when the network
connection is made.
ASSEMBLING
AND
PREPARING
Unpacking
Check your product box for the following
items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations
in this manual may differ from the actual
I
product and item.
/
._//_._ CAUTION
I. Do not use any unapproved items to ensure the safety and product's lifespan.
IoAny damages or injuries by using unapproved items are not covered by the warranty.
.In case of some model, the thin film on screen is a part of TV, So don't take it off.
_@
NOTE
• The items supplied with your product may vary depending upon the
model
• Product specifications
or contents of this manual may be changed
without
prior notice due to upgrade of product functions.
• For an optimal connection,
HDMt cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB flash drive does not fit into your TV's USB port.
*A < 10 mm (0.39 inches)
*B < 18 turn (0.7 inches)
• Use a certified cable with the HDMt logo attached. If you do not use a certified
HDMI cable, the
screen may not display or a connection error may occur.
• Recommended
HDMI cable types
- High-Speed HDMI®F Mcable
- High-Speed HDMI®F Mcable with Ethernet